Get Help


FAQ Curated list of Frequently Asked Questions Guides The right place to share guides and tutorials with the community.
OctoPi WiFi/network connection troubleshooting megatopic ( 2 3 4 5 6 7 ) [Get Help] (121)

Got a problem getting the WiFi connection to work with your OctoPi install? First of all, read this FAQ entry that should already take care of the most common issues: https://discourse.octoprint.org/t/wifi-setup-and-tr…

PSA: Please mark the solutions to your topics as such [Get Help] (3)

All topics you create in this category can be marked as "Solved" by clicking the little :marksolved: icon under the post that contains the solution: [image] Please make heavy use of it. Marking a topic as solved allows…

Need help? READ THIS FIRST! [Get Help] (2)
Backup Plugin setting [Get Help] (4)
Can't start OctoPrint after installing the plugin PSU Control [Get Help] (1)
Octolapse failing [Get Help] (1)
OctoPrint tells me that my printer's firmware lacks mandatory safety features, what does this mean? ( 2 3 ) [FAQ] (44)
Pause at HEIGHT (NOT layer)? [Get Help] (2)
OctoPrint crashed with 50 layers left on a 3 day print. :( [Get Help] (20)
Creating a master Octoprint install [Get Help] (7)
Print issue only with octoprint [Get Help] (2)
Print stops randomly [Get Help] (3)
Octoprint server won't start after upgrade to 1.3.10 ( 2 ) [Get Help] (23)
Sjcam 5000 working with octoprint? [Get Help] (2)
Octopint connects to printer and detects firmware but cannot quite control it [Get Help] (7)
Print automatically restarts (printing from Cura plugin) [Get Help] (2)
M226 Pause Gcode ignored [Get Help] (5)
X/Y axes both half an inch off [Get Help] (2)
Ability to start loaded print from LCD [Get Help] (2)
_psposix.py file has EOL issue [Get Help] (5)
Show end (date and) time instead of duration [Get Help] (2)
Filamentsensor not detected [Get Help] (2)
OctoPi to Lerdge S board [Get Help] (5)
Configuration of a wifi camera [Get Help] (14)
Printer(s) hang mid print [Get Help] (4)
LED panel stays lit when I turn off printer [Get Help] (5)
How to connect Octoprint by serial port i2c with Raspi 3 B (Raspbian)? [Get Help] (6)
Octoprint sets target temp 7454c [Get Help] (5)
Print Job auto-repeating and destroying completed print (printing from Cura plugin) [Get Help] (6)
WIFI Not connecting on Octopi (latest release) [Get Help] (4)